Yes, you can cut down both built up and knock down units. Cut off the top, equal parts off the nail strips, steel, and the back.
My rough opening is too short… can you cut down the pocket frame?
I bought the wrong size built up pocket frame, can I cut the width of the unit?
Yes. You do not need to bother buying another size, you can simply cut the pocket frame to the desired size.
Can a built-up pocket door frame be cut down to a special size door width?
Yes, but with a little more work than a knock-down frame.
Basket: (Example if cutting a 2/4 (28”) pocket door frame to fit 2/2 (26”) door then cut 2” off back end of horizontal battens)
- Cut all horizontal battens down from back side and then re-attach the “2” back” to basket (A)
- Re-attach floor plate on bottom batten
Header:
- Remove track and cut 2” off each end of the track, this way holes will align back with screw/holes (B)
- Cut off equal amount, off both ends of header. (Example if cutting a 28” pocket door frame to fit 26” door, then cut 2” off both ends of header) (C)
- Re-attach track to header
Continue to assemble pocket door frame per the instructions.
Can I buy direct from you?
No, we do not sell directly to the public. We sell direct to distribution centers and contracted customers. If you have a question about sales, please contact quotes@afwoodinc.com
I have hardware missing, what do I do?
Go directly to whom you purchased your pocket door through. They can purchase replacement hardware for you. Give us a call if they give you a hard time.
I have another brand pocket door frame, not an A&F Wood frame. Can I use A&F Wood hardware on the other brand that I bought?
No, our hardware is specifically designed for our pocket door frames. Any other brand is not compatible with our brand.
What is the smallest frame size that I can use both the soft close AND soft open hardware?
A 2/4 size is the smallest frame size where you can have both the soft open AND soft close mechanism.